Scanning Barcodes
From WTS Help
Revision as of 18:14, 9 April 2013 by 12.196.11.130 (Talk)
Scanner Issues:
The handheld scanners sometimes needs to be programmed to understand the logic of the bar-code and to add the TAB at the end of the scan. This will need to be done when the scanner is first received. Rarely you will need to reprogram the scanner if it was not charged and lost all its memory due to the low battery or no battery power.
The following documents can be printed or displayed at 100percent on the computer screen and the bar-codes can be scanned to program / reprogram the scanner:
